Golf Mk4
| Assembly overview - rear axle with four-wheel drive |
Note| t | Always renew self-locking nuts and bolts. |
| t | Always renew corroded nuts and bolts. |
| 1 - | Subframe |
| q | Assembly overview → Chapter. |
| 2 - | Final drive |
| q | Repairing → Rep. Gr.39 |
| 3 - | Cross member |
| 4 - | Anti-roll bar |
| q | Repair paint damage and apply corrosion protection coating as necessary. |
| 5 - | Gas-filled shock absorber |
| q | Assembly overview → Chapter. |
| q | Removing and installing → Chapter. |
| 6 - | Wheel bearings |
| q | Removing and installing → Chapter. |
| 7 - | Trailing arm |
| q | Assembly overview → Chapter. |
| 8 - | Transverse link |
| q | Assembly overview → Chapter. |
| 9 - | Coil spring |
| q | Assembly overview → Chapter. |
| q | If coil spring is renewed, bump stop → Item must also be renewed. |
| 10 - | Propshaft |
| q | Repair instructions → Rep. Gr.39. |
| 11 - | Twelve-point bolt |
| q | → Rep. Gr.39 |