Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing wheel bearing/hub unit on vehicles with drum brakes >
< Removing
Golf Mk4
Running gear, axles, steering - front and four-wheel drive
Rear suspension, drive shaft
Repairing wheel bearings / moving_and_installing_wheel_bearing/wheel_hub_unit_on_vehicles_with_disc_brakes/">Removing and installing wheel bearing/wheel hub unit on vehicles with disc brakes
Installing
Installing
Installing
–
Push wheel bearing/wheel hub unit as far as possible onto stub axle.
–
Screw on assembly tool -3420- and pull on wheel bearing/wheel hub unit to stop.
Ensure that the wheel hub/wheel bearing unit does not cant!
–
Unscrew assembly tool -3420-.
–
Use a new 12-point nut
-A-
and tighten to 175 Nm.
–
Install brake disc.
–
Drive in grease cap.
Note
t
Always renew grease caps.
t
Damaged grease caps allow moisture to enter the bearing. That is why it is essential to use the tool shown in the illustration.
Further installation in reverse order.
–
Install wheel and tighten bolts or nuts
→ Chapter
.
Torque settings:
Brake caliper to rear axle
65 Nm
Running gear, axles, steering - front and four-wheel drive
Rear suspension, drive shaft
Repairing wheel bearings / moving_and_installing_wheel_bearing/wheel_hub_unit_on_vehicles_with_disc_brakes/">Removing and installing wheel bearing/wheel hub unit on vehicles with disc brakes
Installing
Removing and installing wheel bearing/hub unit on vehicles with drum brakes >
< Removing