Volkswagen Workshop Service and Repair Manuals > Golf Mk4 > Running gear, axles, steering - front and four-wheel drive | Wheels, tyres. axle align | Wheel alignment

Adjusting camber on front axle

If values exceed the tolerances, the vehicle's transverse inclination must be checked and corrected if necessary → Chapter.

Only by moving the subframe is it possible to alter the camber to a minimum degree.

–	Loosen bolts -1- and -2-.

–	Move subframe until camber on both sides is even.

Moving the subframe can change the caster!

After moving subframe, check caster.

–	Secure subframe with new bolts.

Torque settings
Subframe to body Bolt position -1- Use new bolts!	100 Nm + 90°
Subframe to body Bolt position -2- Use new bolts!	100 Nm + 90°

Volkswagen Workshop Service and Repair Manuals