Volkswagen Workshop Service and Repair Manuals > Golf Mk4 > Vehicle electrics | Electrical system | Lights, lamps, switches inside, anti-theft system | Interior lights and switches | Removing and installing window regulator switch | Removing and installing window regulator switch in driver's door E40

Removing and installing window regulator switch in driver's doorE40

Removing and installing window regulator switch in driver's door-E40-

Note

The window regulator switches -E40- (in the driver's door) cannot be removed separately. The complete door control unit must be renewed.

Removing:

–	Switch off ignition and all electrical consumers and remove ignition key.

–	Push trim panel -1- off handle recess -2- using a screwdriver.

–	Carefully unclip and lift handle recess -2- together with operating element out of door trim, making sure that support-1- is not damaged.

–	Separate connector -3-.

–	Unscrew securing screws -arrows- and remove door control unit.

Installing:

Install in reverse order of removal.

Volkswagen Workshop Service and Repair Manuals