Golf Mk4
Assembly overview - vehicles 05.99 ► |
- | Specified torques → Chapter |
1 - | Hexagon bolts |
q | With cast-iron block: M10×50 mm |
q | With aluminium block: M10×55 mm, renew bolts (coated with locking fluid) |
q | Tightening sequence: tighten top right bolt first → Item, then bottom right bolt → Item and finally the left bolts (from driver perspective) |
2 - | Bracket |
3 - | Hexagon bolt |
q | With cast-iron block: M10×95 mm |
q | With aluminium block: M10×100 mm, renew bolts (coated with locking fluid) |
q | Tightening sequence: tighten top right bolt first → Item, then bottom right bolt → Item and finally the left bolts (from driver perspective) |
4 - | Cross-head screws |
5 - | Hexagon nut |
q | M8 |
6 - | Hexagon nut |
q | M8 |
7 - | Cross-head screw |
8 - | Voltage regulator |
q | Removing and installing → Chapter |
q | Checking carbon brushes → Chapter |
9 - | Protective cap |
10 - | Alternator |
11 - | Poly V-belt |
q | Removing and installing → Chapter |
q | Belt routing → Chapter |
12 - | Tensioning roller |
13 - | Hexagon bolts |
q | M8×85 mm |