volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Solar panelVAS 6102A > < Charging battery
Dealing with problems with MidtronicsINC 940 battery tester
Dealing with problems with Midtronics -INC 940- battery tester
Under certain circumstances, the display may show errors or messages according to status.
The most frequent display messages are listed below, together with suggested solutions.
  Note
For messages not listed here, please refer to → operating manual INC 940.
   
Display messageMeasures
Check connection.
–  Check whether terminals of battery charger are firmly connected to battery terminals.
–  Check battery terminals are tightened according to regulations and do not have corrosion.
Terminals connected?Safety function of tester.
–  Connect terminals to battery before starting charging procedure.
System noise
–  Switch off all electrical consumers.
–  Wait until all electrical loads monitored by onboard supply control unit have switched off.
–  Remove ignition key.
–  Disconnect any suspect electrical equipment not connected to onboard supply as standard.

Wait a few minutes and repeat charging procedure → Chapter.
   

Solar panelVAS 6102A > < Charging battery