volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Types of protective tube on uniform Lambda probes > < Renewing LSF lambda probe (4-pin)

Golf Mk4

Renewing LSU Lambda probe (6-pin)
Renewing LSU Lambda probe (6-pin)
  Note
t  If necessary, replace attachment parts, cable ties or marking rings to match the uniform probe to the defective probe as specified.
t  The wires should not be crimped or cut as otherwise the function of the Lambda probe will be impaired.
–  Remove the old Lambda probe.
   
–  Place both Lambda probes next to each other so that the sensor housings are at the same height.
  N97-10743
–  Tie back any excess in the uniform probe length (approx. 50 - 250 mm) to the size of the defective probe and secure with cable ties -1-.
–  Install the new Lambda probe in the vehicle.
  N97-10744

Types of protective tube on uniform Lambda probes > < Renewing LSF lambda probe (4-pin)