Golf Mk5
Front bumper attachments |
Note
Minor differences will be encountered on removal and installing, depending on version. |
1 - | Cover |
q | Material PP/EPDM |
q | Removing and installing → Chapter |
2 - | Side marker light |
q | Left and right |
q | Not for all countries |
q | Removing → Electrical system; Rep. Gr.94. |
3 - | Left bumper moulded strip |
q | Material PP/EPDM |
q | Engaged in cover |
q | Bumper strip can be levered out of fastenings carefully from outside using a plastic wedge and removed |
4 - | Left air intake grille |
q | Pull forwards out of detents in -direction of arrow- |
5 - | Moulded part |
q | Not for all countries |
q | Engaged in cover |
q | Can be removed only when bumper has been removed |
6 - | Spoiler bracket |
q | Can be removed only when bumper has been removed |
7 - | Spoiler |
q | Material PC/ABS |
q | Engaged in cover |
q | Can be removed only when bumper has been removed |
8 - | Centre air intake grille |
q | Pull forwards out of detents in -direction of arrow- |
9 - | Bolt |
q | 1.5 Nm |
10 - | Right air intake grille |
q | Remove bolt -8- and pull forwards out of fastening in -direction of arrow- |
11 - | Clip |
q | For separate number plate carrier |
q | Qty. 4 |
12 - | Number plate carrier |
q | For various countries |
q | Installing → Item |
13 - | Right bumper strip |
q | Material PP/EPDM |
q | Engaged in cover. |
q | Bumper strip can be levered out of fastenings carefully from outside using a plastic wedge and removed |