Golf Mk5
|
|
WARNING
|
– | Note front door gap dimensions → Rep. Gr.00. |
Adjustments are carried out using eccentric pin -7-. |
Other measures such as raising the door have no effect. Subsequent pressure from above will cause the door to sack again. |
– | Loosen bolt for eccentric pin -5-. |
– | Adjust eccentric pin -7- within adjustment range -6- using 15 mm ring spanner -T10344-. |
– | Tighten bolt -5- before checking setting. |
The door outer panel -2- can be adjusted if the adjustment range is insufficient. |
– | Loosen bolts -3- and move door outer panel -2-. |
– | Retighten bolts -3- → Chapter. |