Golf Mk5
| Assembly overview - door handle and door lock |
Note| Only the left side is shown. The procedure for the right side is similar. |
| 1 - | Door lock |
| q | Removing and installing → Chapter |
| 2 - | Cable |
| q | To release lock from outer door handle |
| 3 - | Bolt |
| q | To secure lock on door inner part |
| q | 18 Nm |
| q | Qty. 2 |
| 4 - | Bearing plate |
| q | Removing and installing → Chapter |
| 5 - | Bolt |
| q | For lock cylinder |
| 6 - | Locking screw |
| q | Not fitted on all models |
| q | This bolt is installed to provide additional security for the bearing plate |
| 7 - | Base |
| 8 - | Lock cylinder housing |
| q | Only on driver side |
| q | Installed on the passenger side is just a housing |
| q | Removing and installing → Chapter |
| 9 - | Cover |
| q | For lock cylinder housing |
| q | Secured to lock cylinder housing with three locking lugs |
| 10 - | Key |
| q | Changing battery → Chapter |
| q | Adapting new or additional key to remote control and immobiliser → Chapter |
| 11 - | Door handle with base |
| q | Removing and installing → Chapter |
| 12 - | Base |
| q | Part of door handle |
| 13 - | Torx screw |
| q | Socket -T 10072- |
| 14 - | Spreader rivet |
| q | Not installed on Golf |
| 15 - | Retaining bracket |
| q | Not installed on Golf |
| 16 - | Cable |
| q | To release lock from inner door handle |
| 17 - | Cover |
| q | Not supplied as part of door lock |
| q | Secured to door lock with three locking lugs |