Installation instructions for bonding in new door outer panel |
Note t
| If both door outer panels on one side have to be renewed, the sequence must be observed. The rear door outer panel is aligned and bonded in first, followed immediately by the front door outer panel. The long fixing blocks must be bonded in from the rear door outer panel to the front door outer panel. |
t
| If door outer panel CDP coating is damaged on inside in bonding area, or if this area has been painted, this area must be primed with glass/paint primer D 009 200 02. |
t
| The 1K window adhesive DH 009 100 must be heated in cartridge heater -V.A.G 1939 A- for 20 minutes. |
–
| Clean contact surfaces on retaining rails thoroughly using cleaning solution D 009 401 04. |
|
|
|