–
| Fit housing -3- in door handle mounting plate at right angles -arrow-. |
Door handle -2- must rest only lightly against door panel. |
–
| Now tighten bolt -1- in bearing plate using socket -T 10072-. |
The door handle -2- locates in the housing -3- with a well audible click. |
Note During installation, housing must be pressed against door panel. Door handle rests only lightly against door panel. |
Further installation is performed in the reverse order of removal. |
l
| Then always check function while door is still open, as an incorrectly fitted and adjusted Bowden cable cannot open the door. |
|
|
|