Adjusting drive for sliding/tilting sunroof glass panel (0 position) |
There may be a requirement to adjust the 0 position if the drive was removed when not in 0 position or the sliding/tilting sunroof glass panel was opened or closed using the emergency key. |
Drive removed but still connected electrically. |
–
| Select “open sunroof” using preselection control rotary switch. |
–
| Select “close sunroof” using preselection control rotary switch. |
–
| Select “tilt sunroof” using preselection control rotary switch. |
–
| Select “close sunroof” using preselection control rotary switch. |
–
| Install drive in this position (0 position) with sliding/tilting sunroof glass panel closed. |
|
|
|