volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Adjusting height of glass panel of sliding/tilting sunroof > < Installing glass panel of sliding/tilting sunroof

Golf Mk5

Zero position
Zero position
   
The mark -arrow- on the rear of the guide upper section -1- must, on both sides, lie within the marks dimension -a- on the guide plate -2-.
The guide plate -2- must be located in the guide rails (cannot be moved by hand).
If this is not the case, adjust parallel running → Chapter.
  N60-0109
–  Insert sliding/tilting sunroof glass panel -2- from above and fit bolts -1-.
–  Lightly tighten bolts -1-.
–  Adjusting height of glass panel of sliding/tilting sunroof: → Chapter
  Note
t  After adjusting panel height, tighten securing screws (4.5 Nm).
t  Install bellows after panel height adjustment.
  N60-10027

Adjusting height of glass panel of sliding/tilting sunroof > < Installing glass panel of sliding/tilting sunroof