Golf Mk5
|
| – | Release gearstick insulation -3- from centre console (only vehicles with a gearstick). |
| – | Remove the two bolts -2- (1.5 Nm). |
| – | Release ashtray unit -1- from centre console and disconnect wiring harness (dependent on vehicle equipment). |
Note| A storage compartment may be installed instead of an ashtray -1-, but the removal is identical. |
| – | Remove bolt -1- (1.5 Nm) from both sides of centre console. |
| – | Removal of left trim in footwell -2- is not necessary. |
| – | Removal of right trim in footwell is also superfluous. |
Note| When securing the centre console, ensure that the footwell trim -2- engages in the mounting -3-. |
| – | Remove the two bolts -4- (1.5 Nm). |
| – | Take out mat from centre console and remove screw -3- (1.5 Nm). |
| – | Remove the two bolts -2- (1.5 Nm). |
| – | Pull centre console cover -1- out in direction of -arrow-. |
Note| When installing, bolts must be installed in sequence -2-, -3- and -4-. |
|
