Golf Mk5
|
– | Release gearstick insulation -3- from centre console (only vehicles with a gearstick). |
– | Remove the two bolts -2- (1.5 Nm). |
– | Release ashtray unit -1- from centre console and disconnect wiring harness (dependent on vehicle equipment). |
Note
A storage compartment may be installed instead of an ashtray -1-, but the removal is identical. |
– | Remove bolt -1- (1.5 Nm) from both sides of centre console. |
– | Removal of left trim in footwell -2- is not necessary. |
– | Removal of right trim in footwell is also superfluous. |
Note
When securing the centre console, ensure that the footwell trim -2- engages in the mounting -3-. |
– | Remove lining mat -4- from storage compartment. |
– | Unscrew bolt -5- (1.5 Nm). |
– | Remove the two bolts -3- (1.5 Nm). |
– | Remove the two bolts -2- (1.5 Nm). |
– | Pull centre console cover -1- out in direction of -arrow-. |
Note
When installing, bolts must be installed in sequence -2-, -5- and -3-. |
|