Golf Mk5
|
– | Remove the two trim lining mats -2- from the extension -4-. |
– | Remove lining mat -5- from centre console. |
– | If fitted, remove „AUX IN socket“-1- → Communication; Rep. gr.91 |
– | Remove the three bolts -3- (1.5 Nm). |
– | Release extension from mountings. |
– | Pull extension forwards through opening for handbrake lever. |
– | Release gearstick insulation -3- from centre console (only vehicles with a gearstick). |
– | Remove the two bolts -2- (1.5 Nm). |
– | Release ashtray unit -1- from centre console and disconnect wiring harness (dependent on vehicle equipment). |
Note
A storage compartment may be installed instead of an ashtray -1-, but the removal is identical. |
– | Unscrew bolt -1- (1.5 Nm). |
– | Pull left footwell trim -2- out of mountings. |
Note
t | Removal of right footwell trim is identical. |
t | When installing, first insert footwell trim -2- into mounting -3-. |
– | Remove the two bolts -4- (1.5 Nm). |
– | Unscrew bolt -3- (1.5 Nm). |
– | Remove the two bolts -2- (1.5 Nm). |
– | Pull centre console cover -1- out in direction of -arrow-. |
Note
When installing, bolts must be installed in sequence -2-, -3- and -4-. |
– | Remove centre console -1- from vehicle. |
Note
When installing, ensure centre console locks into mountings -arrows- of dash panel. |