Volkswagen Workshop Service and Repair Manuals > Golf Mk5 > Body | General body repairs, interior | Interior equipment | Sill panel mouldings | Removing and installing sill panel mouldings (4-door)

Removing

–	Pull out rear bench seat from front anchor points → Chapter.

Note

Complete removal of the rear bench seat is not necessary.

–	Pull out wheel housing trim (4-door) from mountings in transition area to sill panel moulding.

–	Pull out sill panel moulding from front sill panel and from beading of door seal.

–	Detach guide -1- from lower B-pillar trim.

–	Pull out sill panel moulding from rear sill panel and from beading of door seal.

–	Detach guide -2- from lower B-pillar trim.

–	Open tab -3- and guide seat belt out through.

Note

Before installing, check six retaining clips for damage and renew if necessary.

Volkswagen Workshop Service and Repair Manuals