volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing upper B-pillar trim

Golf Mk5

Removing
   
Removing
–  Remove airbag emblem -1- and unscrew bolt -2- (4 Nm).
  Note
When reinstalled, airbag emblem -1- must be renewed.
–  Pull out trim in lower area from mounting in body -arrow A-.
–  Release trim from door seal beading.
–  Pull trim out of upper mountings -arrow B-.

4-door
   
–  Open flap -1- in lower area of B-pillar.
–  Push the floor covering to the side slightly and remove the bolt -2- (40 Nm)
–  Remove belt end anchor -3- from body.
2-door
–  Remove bench seat → Chapter.
–  Remove sill panel moulding (2-door) → Chapter
–  Remove belt end anchor from seat belt → Chapter.
All vehicles
–  Pull seat belt through opening in trim.
  N70-10266

Installing > < Removing and installing upper B-pillar trim