volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Dismantling and assembling heater and air conditioner unit "Climatronic" > < Removing
Dismantling and assembling heater and air conditioner unit „Climatic“
   
Dismantling and assembling heater and air conditioner unit „Climatic“
1 - Temperature flap control motor -V68-
q   Checking: vehicle diagnosis, testing and information system -VAS 5051- (or later model)
q   Removing and installing → Chapter
q   Renewing: initiate basic settings using vehicle diagnosis, testing and information system -VAS 5051- or successor model → Chapter
2 - Bracket
3 - Bolts
q   Bolts must be removed to separate air distribution housing from evaporator housing.
4 - Cover
5 - Air recirculation flap control motor -V113-
q   Checking: vehicle diagnosis, testing and information system -VAS 5051- (or later model)
q   Removing and installing → Chapter
q   Renewing: initiate basic settings using vehicle diagnosis, testing and information system -VAS 5051- or successor model → Chapter
6 - Air intake housing
q   With air recirculation flap
7 - Upper part of evaporator housing
q   Dismantling and assembling evaporator housing → Chapter
8 - Lower part of evaporator housing
q   Dismantling and assembling evaporator housing → Chapter
9 - Evaporator
q   Removing and installing → Chapter
10 - Evaporator temperature sensor -G308- or evaporator output temperature sender -G263-
q   Checking: vehicle diagnosis, testing and information system -VAS 5051- (or later model)
  Note
One of the two component designations appears depending on software. The functions are identical.
q   Removing and installing → Chapter
11 - Connections for glove compartment cooling
q   To dismantle, remove glove compartment → General body repairs, interior; Rep. gr.68.
q   Installation position of connections for glove compartment cooling → Fig.
12 - Cooling hose for glove compartment
q   To dismantle, remove glove compartment → General body repairs, interior; Rep. gr.68.
13 - Fresh air blower series resistor with overheating fuse -N24-
q   Removing and installing → Chapter
14 - Fresh air blower -V2-
q   Removing and installing → Chapter
15 - Dust and pollen filter
q   With activated charcoal filter
q   Removing and installing → Chapter
16 - Cover
q   For dust and pollen filter.
17 - Heat exchanger
q   Removing and installing → Chapter
18 - Heat exchanger trim
19 - Auxiliary air heater element -Z35-
q   Only in vehicles with diesel engines without supplementary heater.
q   Checking: with vehicle diagnosis, testing and information system -VAS 5051- (or later model), under Heating, ventilation, air conditioning; Systems capable of self-diagnosis; Auxiliary heating; Electrical components.
q   Removing and installing on vehicles up to 1K-7P015628 and 1K-7B084800 → Chapter.
q   Removing and installing on vehicles from 1K-7P015629 and 1K-7B084801 → Chapter.
20 - Distribution box

   
Installation position of connections for glove compartment cooling
1 - Connecting piece
2 - Valve
  N87-10336

Dismantling and assembling heater and air conditioner unit "Climatronic" > < Removing