Golf Mk5
Passenger compartment heating |
Before removing components marked with **, disconnect battery → Electrical system; Rep. gr.27. |
1 - | Dash panel** |
2 - | Centre vents |
q | Removing vent → Chapter. |
3 - | Right side vent |
4 - | Right vent |
q | Removing vent → Chapter. |
5 - | Controls for fresh and heated air |
q | With fresh air and air recirculation flap switch -E159-. |
q | With heated driver seat regulator -E94- and heated front passenger seat regulator -E95- |
q | For vehicles with supplementary heating having instant heating button -E537-. |
q | Removing controls → Chapter. |
6 - | Fresh air and air recirculation flap control motor -V154- |
q | Removing → Chapter |
7 - | Right footwell vent |
q | Removing and installing → Chapter |
8 - | Fresh air blower -V2- |
q | Removing → Chapter |
9 - | Fresh air blower series resistor with overheating fuse -N24- |
q | Removing and installing → Chapter |
10 - | Baffle plate for heater unit |
q | Removing → Chapter |
11 - | Cap |
q | Fitted only in vehicles without air duct to vent in rear centre console. |
12 - | Dust and pollen filter |
q | With activated charcoal filter |
q | Removing and installing → Chapter |
13 - | Connecting piece |
q | For centre console air duct (to rear vents) |
q | To remove, remove centre console → General body repairs, interior; Rep. gr.68. |
14 - | Air duct for right rear footwell |
q | Removing and installing → Chapter |
15 - | Air duct for left rear footwell |
q | Removing and installing → Chapter |
16 - | Securing bolt |
q | Qty. 8 |
q | Various lengths. |
17 - | Adapter for controls |
q | Removing and installing → Chapter |
18 - | Auxiliary air heater element -Z35- |
q | With auxiliary air heater control unit -J604-. |
q | Checking: with vehicle diagnosis, testing and information system -VAS 5051- (or later model), under Heating, ventilation, air conditioning; Systems capable of self-diagnosis; Auxiliary heating; Electrical components. |
q | Installed only in vehicles with diesel engines without supplementary heater. |
q | Removing and installing → Chapter |
19 - | Heat exchanger |
q | After renewing heat exchanger, renew coolant completely |
q | Removing and installing → Chapter |
20 - | Left footwell vent |
q | Removing and installing → Chapter |
21 - | Bowden cable for temperature flap |
q | Removing and installing → Chapter |
22 - | Flexible shaft for air distribution |
q | Removing and installing → Chapter |
23 - | Heater unit |
q | Removing and installing → Chapter |
q | Dismantling and assembling → Chapter |
24 - | Left side vent |