volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Automatic gearbox, gears, control > < Topping up ATF

Golf Mk5

Draining and filling ATF
Draining and filling ATF
   
–  Switch off engine.
  N34-10476
–  Remove inspection plug for ATF level from oil pan -arrow-.
  N37-0189
–  Unscrew and remove ATF inspection plug -A-.
–  Always renew oil seal -B-.
–  Unscrew and remove overflow pipe -C-.
–  Drain ATF.
–  Screw in overflow pipe -C- → Chapter.
  N38-10003
–  Screw in oil filler adapter -VAS 6262/2- hand tight.
–  Shake oil bottles before opening them.
–  Before screwing adapter for oil filling -VAS 6262 A- onto oil bottle, take note of the notes regarding the breather pipe → Anchor.
–  Add 3 litres of ATF → Electronic parts catalogue ETKA through filler pipe.
  N37-10321
–  Screw in ATF inspection plug -A- hand-tight with new seal -B-.
–  Start engine, shift through all selector lever positions with vehicle stationary, leaving selector lever in each position for about 10 seconds.
–  Finally, check ATF level and top up → Chapter.
  N38-10003

Automatic gearbox, gears, control > < Topping up ATF