Golf Mk5
| Overview of selector mechanism up to 02.2009 |
| 1 - | Selector cover with knob |
| q | Do not remove knob without reason. For emergency release, only the cover needs to be unclipped → Chapter. |
| q | Before removal of handle, pull button out past its pressure point. Secure button with a cable tie or tape. This will prevent the button from being accidentally pressed into the knob. |
| q | If button is pressed into removed handle |
| – | Always pull out button past the felt pressure point before installing knob. |
| 2 - | Selector mechanism with selector lever |
| q | Removing and installing → Chapter |
| 3 - | Bolt with spring |
| q | 3 Nm |
| 4 - | Pin |
| q | Removing → Chapter |
| q | Do not grease |
| 5 - | Securing clip |
| q | Always renew after removing |
| 6 - | Nut |
| q | 9 Nm |
| q | Qty. 4 |
| 7 - | Selector housing |
| q | With seal |
| 8 - | Selector lever cable |
| q | Cable must not be greased |
| q | Removing and installing → Chapter |
| q | Checking → Chapter |
| q | Adjusting → Chapter |
| 9 - | Hexagon nut with washer |
| q | 8 Nm |
| q | Qty. 4 |