Golf Mk5
Overview of selector mechanism in vehicles from 03.2009 onwards |
1 - | Selector cover with knob |
q | Do not remove knob without reason. For emergency release, only the cover needs to be unclipped → Chapter. |
q | Before removing knob, pull lock button out past its pressure point. Secure locking button with a cable tie or appropriate wire against being pressed in. This will prevent lock button from being accidentally pressed into the knob. |
q | Do not press button in, otherwise knob must be dismantled and prepared for installation → Chapter |
q | Removing and installing → Chapter |
2 - | Selector lever and selector mechanism with selector lever cable |
q | With selector lever lock solenoid -N110- |
q | Cable must not be greased |
q | Removing and installing → Chapter |
q | Checking → Chapter |
q | Adjusting → Chapter |
3 - | Bolt |
q | 8 Nm |
4 - | Hexagon flange nut |
q | 8 Nm |
q | Qty. 4 |
5 - | Selector housing |
6 - | Securing clip |
q | Always renew after removing |
7 - | Securing clip |
q | Always renew after removing |