Golf Mk5
Assembly overview - hydraulics (RHD) |
1 - | Brake fluid reservoir |
2 - | Seal |
q | For plastic supply hose |
q | The seals must be located in supply hose |
3 - | Supply hose |
q | Made of plastic |
q | May be made of rubber → Item |
4 - | Master cylinder |
q | Removing and installing → Chapter |
5 - | Clip |
q | Pull clip out to stop to remove or install pipe line |
q | Pulled out to side on some master cylinders |
6 - | Seal / O-ring |
q | Pull onto line connection |
q | Insert with brake fluid |
q | Seals/O-rings are adapted to configuration of line connection → Fig. |
q | Allocation → Electronic parts catalogue „ETKA“ |
7 - | Retainer |
q | To remove and install, separate master cylinder from clutch pedal (⇒ Removing and installing clutch pedal) |
q | Golf 2004 ► → Chapter |
q | Golf 2009 ► → Chapter |
q | Golf Plus → Chapter |
q | Scirocco → Chapter |
8 - | Clutch pedal |
q | Removing and installing, Golf 2004 ► → Chapter |
q | Removing and installing, Golf 2009 ► → Chapter |
q | Removing and installing, Golf Plus → Chapter |
q | Removing and installing, Scirocco → Chapter |
9 - | Hexagon nut, → Item |
10 - | Bracket |
q | Secured to body |
q | Hidden by engine/gearbox mounting |
11 - | Pipe line |
q | Pipe and hose/pipe line → Item may be in one piece |
q | Allocation → Electronic parts catalogue „ETKA“ |
q | To remove, remove battery and battery tray → Electrical system; Rep. gr.27. |
12 - | Seal / O-ring |
q | Pull onto line connection |
q | Insert with brake fluid |
q | Seals/O-rings are adapted to configuration of line connection → Fig. |
q | Allocation → Electronic parts catalogue „ETKA“ |
13 - | Pipe/hose line |
q | Pipe → Item and hose/pipe line may be in one piece |
q | Allocation → Electronic parts catalogue „ETKA“ |
q | To remove, remove battery and battery tray → Electrical system; Rep. gr.27. |
14 - | Bracket |
q | Secured to body |
15 - | Seal / O-ring |
q | Pull onto line connection |
q | Insert with brake fluid |
q | Seals/O-rings are adapted to configuration of line connection → Fig. |
q | Allocation → Electronic parts catalogue „ETKA“ |
16 - | Clip |
q | Pull out clip to stop to remove and install pipe/hose line or bleeder. |
17 - | Bleeder valve |
q | Bleed clutch system → Chapter. |
18 - | Dust cap |
19 - | Breather |
20 - | Seal / O-ring |
q | Pull onto line connection |
q | Insert with brake fluid |
q | Seals/O-rings are adapted to configuration of line connection → Fig. |
q | Allocation → Electronic parts catalogue „ETKA“ |
21 - | Slave cylinder |
q | Can be renewed only with gearbox removed |
q | Removing and installing, ⇒ Repairing clutch release mechanism, → Chapter |
22 - | Gearbox |