volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing line for clutch actuator > < Removing

Golf Mk5

Installing
Installing
Install in the reverse order of removal, observing the following:
l  The securing bolts for the slave cylinder must be tightened only in small stages.
Otherwise, the tabs with the bolt holes may break off.
–  Bolt on slave cylinder with release bearing → Item.
.
   
–  Check O-ring -3- on slave cylinder.
–  Press bleeder -4- onto slave cylinder connection -1- until securing clip -2- engages audibly.
–  Check by pulling on bleeder.
l  Install gearbox.
–  Bleed clutch system → Chapter.
  A30-0137

Removing and installing line for clutch actuator > < Removing