Golf Mk5
| Repairing “Sachs” clutch |
| 1 - | Dual-mass flywheel |
| q | Removing and installing → Engine, mechanics; Rep. Gr.13 |
| q | Ensure that centring pins fit tightly |
| q | Contact surface for clutch lining must be free of grooves, oil and grease |
| 2 - | Clutch plate |
| q | Allocation → Electronic parts catalogue “ETKA” |
| q | Removing and installing → Chapter |
| q | Renew only together with pressure plate |
| q | Installation position → Fig. |
| 3 - | Thrust plate |
| q | With adjusting mechanism |
| q | Allocation → Electronic parts catalogue “ETKA” |
| q | Renew only together with clutch plate |
| q | Removing and installing → Chapter |
| q | Check ends of diaphragm spring → Fig. |
| q | Checking spring connections and riveted connections → Fig. |
| 4 - | Bolt M7 - 20 Nm |
| q | Loosen or tighten diagonally in small steps |
