During the following work, ensure that no brake fluid lands on longitudinal member or gearbox. If this does happen, clean the affected areas thoroughly.
–
Clamp off supply hose to master cylinder using hose clamp -3094-.
Remove pipe/hose line or plastic line from master cylinder as follows:
–
Release securing clip -3- using screwdriver and pull off line -1- with O-ring -2-.
Caution
Do not operate clutch pedal any more.
Remove pipe/hose line or plastic line from bleeder as follows:
–
Release securing clip -2- using screwdriver and pull line -4- with O-ring -3- off bleeder -1-.