Golf Mk5
Assembly overview - hydraulics (LHD vehicles) |
1 - | Brake fluid reservoir |
2 - | Spring-type clip |
3 - | Supply hose |
q | Rubber |
q | From 12.05, plastic in some vehicles → Fig. |
4 - | Master cylinder |
q | Removing and installing → Chapter |
5 - | Clip |
q | Pull clip out to stop to remove or install line between master and slave cylinders |
6 - | Support |
q | To remove and install, separate master cylinder from clutch pedal. |
q | Golf → Chapter |
q | Golf Plus → Chapter |
7 - | Clutch pedal |
q | Removing and installing, Golf → Chapter |
q | Removing and installing, Golf Plus → Chapter |
8 - | Hexagon nut, → Item |
9 - | O-ring |
q | Pull onto line connection |
q | Insert with brake fluid |
q | Seals, O-rings depending on configuration of line connections → Fig. |
q | Allocation → Electronic parts catalogue „ETKA“ |
10 - | Seal |
q | Pull onto line connection |
q | Insert with brake fluid |
q | Seals, O-rings depending on configuration of line connections → Fig. |
q | Allocation → Electronic parts catalogue „ETKA“ |
11 - | Pipe/hose line |
q | Allocation → Electronic parts catalogue „ETKA“ |
q | To remove, remove battery and battery tray → Electrical system; Rep. gr.27. |
12 - | Bracket |
q | For pipe/hose line → Item |
q | Secured to body |
13 - | Plastic line |
q | Allocation → Electronic parts catalogue „ETKA“ |
q | To remove, remove battery and battery tray → Electrical system; Rep. gr.27. |
14 - | Clip |
q | Pull clip out to stop to remove or install line between master and slave cylinders |
15 - | Slave cylinder |
q | Removing and installing → Chapter |
16 - | Dust cap |
17 - | Bleeder valve |
q | Bleeding clutch system → Chapter |
18 - | Gearbox |
19 - | Hexagon bolt → Item |
20 - | Bracket |
q | For pipe/hose line → Item |
|
Item | Material of line connection |
-1- | Line connection with circumferential groove -arrow 1- |
-2- | Line connection with shoulder -arrow 2- |
|