| Checking selector lever cable |
| Selector lever cable must be removed from gearbox so that its ease of movement can be checked. Put removed end down so it does not rub against anything. |
| The selector lever must be moved and then the cable must be reattached to the gearbox. |
| Then the selector lever cable must be adjusted → Chapter. |
| –
| Move selector lever to position »P« position. |
| –
| Remove cable from lever on gearbox. |
| –
| Move selector lever repeatedly from »P« to »S« and back to »P«. |
| l
| Selector lever must move easily. |
| –
| Reinstall cable with »loosened« adjustment screw. |
|
|
|
