Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Installing >
< Removing and installing Haldex coupling pumpV181
Golf Mk5
Power transmission
Propshaft and rear final drive
Final drive, differential, differential lock
Assembly overview - all-wheel drive control unitJ492, Golf 2004 ? and Passat 2006 ? / moving_and_installing_haldex_coupling_pumpv181/">Removing and installing Haldex coupling pumpV181
Removing
Removing
Removing
–
Switch off ignition.
–
Place drip tray underneath.
–
Remove drain plug
-A-
and drain high-performance oil for Haldex coupling completely.
–
Install drain plug
-A-
with new seal and tighten to 30 Nm.
–
Lower final drive slightly. This requires loosening securing bolt
-arrow-
on front mounting bracket for final drive about 7 turns.
–
Pull connector
-arrow-
for pump off control unit.
–
Pull wiring harness together with retainer
-A-
off housing and lay away from housing.
–
Press locking lugs
-B-
together and push as far as possible into drilling in housing.
–
Retighten securing bolt
-arrow-
.
–
Place drip tray under final drive.
–
Remove securing bolts for pump
-1-
.
–
Pull pump
-arrow-
together with wiring protection
-2-
out of Haldex housing.
Power transmission
Propshaft and rear final drive
Final drive, differential, differential lock
Assembly overview - all-wheel drive control unitJ492, Golf 2004 ? and Passat 2006 ? / moving_and_installing_haldex_coupling_pumpv181/">Removing and installing Haldex coupling pumpV181
Removing
Installing >
< Removing and installing Haldex coupling pumpV181