Checking function of open Haldex coupling |
t
| Oil level of Haldex coupling OK. |
t
| Check oil level in Haldex coupling → Chapter. |
t
| Correct engine control unit and ABS control unit installed (check coding and control unit identification numbers). |
Caution For reasons of safety, vehicle must be placed on lifting platform so that wheels have no contact with the ground. |
Carry out test with care to avoid damage. |
|
–
| Depress clutch pedal, engage 1st gear and slowly "drive off". |
All four wheels must now turn. |
–
| Apply handbrake or parking brake. |
Rear wheels must stop and front wheels must continue to turn. |
l
| If rear wheels do not turn |
The Haldex coupling is open and function is OK. |
Haldex coupling is closed. Possible cause of fault |
t
| Main pressure regulating valve might be stuck. |
t
| Mechanical defect in Haldex coupling |
t
| Four-wheel drive control unit -J492- on rear final drive defective. |
t
| Handbrake warning switch -F9- defective. |
t
| Or electromechanical parking brake button -E538- defective. |
|
|
|