volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Torque setting > < Removing

Golf Mk5

Installing
Installing
Install in the reverse order of removal, observing the following:
   
–  Renew O-rings -1- and -2-.
–  Thinly coat O-rings -1- and -2- with high-performance oil for Haldex coupling.
  N39-10107
–  Press in pump -arrow- onto stop. Ensure, when doing so, that wiring protection is properly routed -2-.
–  Tighten bolts -1- to specified torque → Chapter.
  A39-10050
–  Remove securing bolt -arrow- from front mounting bracket.
  A37-10008
–  Clip wiring harness to top of Haldex coupling and join connector -arrow- to control unit.
  N39-10108
–  Secure rear final drive to subframe with a new bolt -arrow- → Running gear, axles, steering; Rep. gr.42.
–  Fill with high-performance oil for Haldex coupling and check oil level in Haldex coupling → Chapter.
  A37-10008

Torque setting > < Removing