volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Checking cooling system for leaks > < Removing

Golf Mk5

Installing
Installing
Installation is carried out in the reverse order. When installing, note the following:
–  Moisten new O-ring -3- with coolant.
   
–  Insert thermostat -4- into connection -2- and turn 1/4 turn (90°) clockwise.
  Note
The brace on the thermostat must be almost vertical.
–  Insert connection -2- with thermostat -4- in cylinder block.
–  Tighten securing bolts -1- to 15 Nm.
–  Replenish coolant. → Chapter
  N19-0257

Checking cooling system for leaks > < Removing