Golf Mk5
Assembly overview - oil filter bracket and engine oil cooler |
1 - | Oil filter bracket |
2 - | 15 Nm + turn (90°) |
q | Renew. |
q | First fit upper left and lower right bolts and then tighten all four bolts diagonally. |
3 - | Seal |
q | Renew. |
4 - | Seal |
q | Renew. |
5 - | Union, 35 Nm |
6 - | Oil supply line, 22 Nm |
q | To turbocharger. |
q | Removing and installing → Chapter |
7 - | Cap, 25 Nm |
8 - | Seal |
q | Renew. |
9 - | Oil filter element |
q | Ensure "Top" is uppermost when fitting |
10 - | Plug, 10 Nm |
q | If seal is leaking, nip open and renew. |
11 - | Oil pressure switch -F1- |
q | 0.7 bar switch: brown. |
q | Tighten to 20 Nm. |
q | If seal is leaking, nip open and renew. |
q | Check → Chapter. |
12 - | Plug, 25 Nm |
13 - | Seal |
q | Renew. |
14 - | Engine oil cooler |
q | Ensure clearance to adjacent components. |
q | See note → Chapter. |
q | Checking engine oil cooler for leaks → Chapter |
15 - | Seal |
q | Renew. |
16 - | Bracket |
17 - | 10 Nm |