Golf Mk5
Note
|
| – | Loosen securing nut -2- from retainer -5-. |
| – | Start union nuts for oil supply line on connections. |
| – | Tighten union nut -8- on oil filter bracket hand tight. |
| – | Tighten union nut -6- on turbocharger hand-tight. |
| – | First tighten union nut -8- on oil filter bracket and then union nut -6- on turbocharger to 22 Nm. |
| – | Attach retaining clips -1- to brackets and tighten securing bolts to 10 Nm. |
| – | Tighten securing nut -2- to 25 Nm. |
| Further installation is basically the reverse of the removal procedure. |
