volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Renewing crankshaft oil seal - belt pulley end

Golf Mk5

Removing
Removing
–  Remove toothed belt. → Chapter
   
–  Remove crankshaft toothed belt pulley. To do this, lock toothed belt pulley using counterhold -3099-.
  Note
When bolting on counterhold, place two washers between toothed belt pulley and counterhold.
–  To guide oil seal extractor -3203-, screw central bolt by hand into crankshaft to stop.
–  Unscrew inner part of oil seal extractor two turns (approx. 3 mm) out of outer part and lock with knurled screw.
–  Oil threaded head of oil seal extractor.
  A13-0056
–  Using great pressure, screw oil seal extractor as far as possible into seal.
–  Loosen knurled screw and turn inner part against crankshaft until oil seal is pulled out.
  A13-0060

Installing > < Renewing crankshaft oil seal - belt pulley end