volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing sealing flange - pulley end > < Removing

Golf Mk5

Installing
Installing
  Note
The oil seal sealing lip must not be additionally oiled or greased.
–  Remove oil residue from end of crankshaft journal using clean cloth.
   
–  Place guide sleeve -T10053/1- onto crankshaft journal.
–  Slide oil seal over guide sleeve onto crankshaft journal.
  N13-0513
–  Press oil seal in to stop using assembly tool -T10053- and centre bolt.
  N13-0514
–  Install crankshaft toothed belt sprocket. To do this, lock toothed belt pulley using counterhold tool -3415-.
–  Tighten new centre bolt to 120 Nm and then 1/4 turn (90°) further (turning further can be done in several stages).
  Note
Thread and shoulder must be free of oil and grease.
–  Install and tighten toothed belt → Chapter.
  N13-0401

Removing and installing sealing flange - pulley end > < Removing