volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Checking piston projection at TDC > < Separating new conrods

Golf Mk5

Separating new conrod
Separating new conrod
–  Mark cylinder allocation of conrod → Item
   
–  Lightly clamp the conrod in a vice using aluminium vice clamps, as shown in the illustration.
  Note
t  To prevent damage to the conrod, only clamp conrod in lightly.
t  Clamp conrod in below the marked line.
–  Unscrew the two bolts -arrows- approx. 5 turns.
  N13-10285
–  Using a plastic hammer, carefully knock against conrod bearing cap -arrow- until it is loose.
  N13-10286

Checking piston projection at TDC > < Separating new conrods