Golf Mk5
| Assembly overview - silencer with mountings (vehicles with front wheel drive) |
| 1 - | 25 Nm |
| q | Renew |
| 2 - | Support ring |
| q | Renew if damaged |
| 3 - | Separating point |
| q | Marked by impressions on exhaust pipe. |
| q | During production, front and rear silencers are installed as a single component. For repairs, front and rear silencers are supplied separately. |
| q | The connection is made with a clamp. |
| q | Cutting exhaust pipe → Chapter. |
| q | Installation position of rear clamp (repair double clamp) → Fig.. |
| q | Evenly tighten threaded connections of clamp (repair double clamp). |
| q | Torque settings for clamp (repair double clamp): M8 = 25 Nm, M10 = 40 Nm. |
| q | Before tightening, align cold exhaust system free of tension → Chapter. |
| 4 - | Rear silencer |
| 5 - | Mounting |
| q | Renew if damaged |
| 6 - | 25 Nm |
| 7 - | Tunnel bridge |
| 8 - | Front silencer |
|
|
