When working on fuel supply and injection system, pay careful attention to the following rules for cleanliness: |
t
| Thoroughly clean all unions and the adjacent areas before disconnecting. |
t
| Place parts that have been removed on a clean surface and cover them over. Do not use fluffy cloths! |
t
| Carefully cover or seal open components if repairs cannot be carried out immediately. |
t
| Only install clean components: replacement parts should only be unpacked immediately prior to installation. Do not use parts that have been stored loose (e.g. in tool boxes etc.). |
t
| When the system is open: Do not work with compressed air if this can be avoided. Do not move vehicle unless absolutely necessary. |
t
| Also ensure that no diesel fuel runs on to the coolant hoses. If necessary, the hoses must be cleaned immediately. Damaged hoses must be renewed. |
|
|
|