volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Pressing in sealing flange with sender wheel > < Renewing crankshaft sealing flange - flywheel end

Golf Mk5

Pressing out sealing flange with sender wheel
Pressing out sealing flange with sender wheel
–  Remove flywheel. → Rep. gr.34
–  Remove flywheel.
–  Remove intermediate plate.
   
–  Rotate crankshaft as shown to TDC No. 1 cylinder.
–  Remove sump.
   Golf, Golf Plus, Touran → Chapter
   Passat → Chapter
  Note
t  For the sake of clarity, the work is performed with the engine removed.
t  The procedure is identical whether the engine is installed or removed.
  N13-10052
–  Remove engine speed sender -G28--arrow-.
–  Unscrew sealing flange securing bolts.
  Note
Sealing flange and sender wheel are pressed off the crankshaft together using three M6 x 35 mm bolts.
  N13-10021
–  Screw three M6 x 35 mm bolts into threaded holes -arrows- of sealing flange.
–  Screw bolts alternately (max. 1/2 turn (180 °) for each bolt) into sealing flange and press sealing flange together with sender wheel off crankshaft.
  N13-10022

Pressing in sealing flange with sender wheel > < Renewing crankshaft sealing flange - flywheel end