Golf Mk5
| Engine codes BMN, BMR and BUZ |
| 1 - | 10 Nm |
| 2 - | Retainer |
| 3 - | 20 Nm |
| 4 - | Seal |
| q | Renew. |
| 5 - | Intake manifold |
| q | With optimised intake air swirl. |
| 6 - | Cable retainer |
| 7 - | 20 Nm |
| 8 - | 10 Nm |
| 9 - | Connecting pipe |
| q | To exhaust gas recirculation cooler |
| 10 - | 20 Nm |
| 11 - | Seal |
| q | Renew. |
| 12 - | 10 Nm |
| 13 - | Intake manifold flap motor -V157- |
| q | The intake manifold flap is closed for approx. 3 seconds when stopping engine and then opens again. This reduces the stop jolt. |
| 14 - | O-ring |
| q | Renew. |
| 15 - | Exhaust gas recirculation valve -N18- with exhaust gas recirculation potentiometer -G212- |
| q | Assembly overview - exhaust gas recirculation → Chapter |
| 16 - | Vacuum unit |
| q | For optimised swirl for intake air. |
