volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Installing > < Removing and installing tandem pump
Removing
Removing
   
–  Pull supply hose -1- (white marking) and return hose -2- (blue marking) off fuel filter.
–  Connect hand vacuum pump with accessories -V.A.G 1390- and water drainage container -V.A.G 1390/1- to return hose -2-.
–  Operate hand vacuum pump until no more fuel comes out of return hose. Be careful that no fuel is sucked into hand vacuum pump.
–  Remove air filter housing → Anchor.
  N20-10010
–  Pull vacuum line -1- off tandem pump -4-.
–  Pull supply hose -2- (white marking) and return hose -3- (blue marking) off tandem pump -4-.
  N20-10001
–  Remove securing bolts -arrows-.
–  Remove tandem pump -4- from cylinder head.
  N20-10001

Installing > < Removing and installing tandem pump