–
| Place the plastic sleeve supplied on the respective valve stem -A-. This will prevent damage to new valve stem seal. |
–
| Place new valve stem seal -B- in valve stem seal fitting tool -3365-. |
–
| Oil valve stem seal sealing lip and press carefully onto the valve guide. |
Further assembly is basically the reverse of the dismantling sequence. In the process, note the following: |
t
| Fit fuel lines (engine codes BAG, BKG) → Chapter. |
t
| Fit fuel lines (engine codes BLF, BLN, BLP) → Chapter. |
t
| Install exhaust gas recirculation valve -N18- → Chapter |
|
|
|