–
| Set vernier gauge on crankshaft flange. |
–
| Measure the distance »a« between crankshaft flange and sender wheel. |
Note If the engine and gearbox support -VAS 6095- does not provide the necessary space, the ruler -T40100- should be placed on the crankshaft flange and the distance determined with a feeler gauge. |
If dimension »a« is too small: |
If dimension »a« is achieved: |
–
| Tighten new securing bolts for sealing flange to 10 Nm using alternate and diagonal sequence. |
|
|
|