Golf Mk5
Assembly overview - parts of cooling system, body side (engine codes BLG, BMY) |
1 - | Radiator/cooler |
q | Removing and installing → Chapter. |
q | After renewing, renew entire coolant. |
2 - | O-ring |
q | Renew if damaged. |
3 - | Upper coolant hose |
q | To connection on cylinder head. |
q | Coolant hose schematic diagram → Chapter. |
4 - | Expansion tank |
q | Test cooling system for leaks using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/8-. |
5 - | Connector |
6 - | Cap |
q | Check using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/9-. |
q | Pressure relief valve must open at between 1.4 and 1.6 bar. |
7 - | 5 Nm |
8 - | Plastic inserts |
q | For securing bolts. |
9 - | Bracket |
10 - | Cowling |
11 - | 5 Nm |
12 - | Radiator fan 2 -V177- |
13 - | Connector |
14 - | Radiator fan -V7- |
q | With radiator fan control unit -J293-. |
15 - | Bracket |
q | For connector. |
16 - | Lower coolant hose |
q | To connection for thermostat. |
17 - | Retaining clip |
18 - | Radiator outlet coolant temperature sender -G83- |
19 - | 5 Nm |