–
| Note position of tensioning roller indicator -1-. Press toothed belt forcefully with thumb -arrow-. The indicator must move. |
–
| Release tension on toothed belt. |
–
| Turn crankshaft two turns in engine direction of rotation. |
–
| Then check position of indicator. It must have returned to its original position. |
If tensioning roller does not return to its initial position |
–
| Renew tensioning roller. |
If both tensioning rollers are OK |
–
| Refit lower toothed belt guard. |
–
| Refit crankshaft pulley. Observe the following: |
t
| The belt pulley and the toothed belt pulley securing bolt must be renewed. |
t
| When installing belt pulley, observe fixing arrangement to toothed belt pulley. |
t
| Tightening procedure for new, oiled bolt: 90 Nm + 1/4 turn (90°) further. |
Note When installing poly V-belt, ensure that belt seats correctly in pulleys. |
–
| Install engine splash protection. |
–
| Install lower part of toothed belt guard. |
–
| Install air filter housing (engine code BCA) → Fig.. |
|
|
|