Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Exhaust gas recirculation system >
< Assembly overview - silencers with mountings
Golf Mk5
Power unit
4-cylinder injection engine (1.4 l engine)
Exhaust system / Parts of the exhaust system
Separating front and rear silencers
Separating front and rear silencers
Separating front and rear silencers
t
The exhaust pipe can be cut through at the point marked in order to renew the front or rear silencer separately.
t
The cutting point is marked by indentations on the periphery of the exhaust pipe.
Special tools and workshop equipment required
t
Pneumatic sabre saw -V.A.G 1523 A-
t
Eye protection
WARNING
To avoid injury from metal shavings, wear eye protection and protective clothing.
–
Cut through exhaust pipe at right angles using e.g. body saw -V.A.G 1523 A- at separating point
-arrow 2-
.
–
When installing, position clamp
-4-
at side markings
-arrow 1-
and
-arrow 3-
.
–
Install clamp so that ends of bolts do not protrude beyond bottom of clamp.
l
Bolted connection faces rear.
–
Align cold exhaust system free of stress.
Power unit
4-cylinder injection engine (1.4 l engine)
Exhaust system / Parts of the exhaust system
Separating front and rear silencers
Exhaust gas recirculation system >
< Assembly overview - silencers with mountings