| Removing and installing parts of cooling system |
WARNING | Steam may escape when expansion tank is opened. Wear eye protection and protective clothing to avoid eye injuries and scalding. Cover cap with cloth and open carefully, |
|
Note | t
| When the engine is warm, the cooling system is under pressure. If necessary, release pressure before beginning repair work. |
| t
| Secure all hose connections with hose clamps comparable to production standard. |
| t
| Hose clip pliers -V.A.G 1921- or hose clip pliers -VAS 6362- are recommended for installation of spring-type clips. |
| t
| Renew gaskets and seals. |
| t
| The arrows on the coolant pipes and on the ends of the hoses must be aligned with each other. |
| Assembly overview - parts of cooling system, engine side, engine codes BGU, BSE, BSF → Chapter. |
| Assembly overview - parts of cooling system, engine side, engine codes CCSA, CMXA → Chapter. |
| Assembly overview - parts of cooling system, body side → Chapter. |
| Coolant hose schematic diagram - engine codes BGU, BSE, BSF → Chapter. |
| Coolant hose schematic diagram - engine codes CCSA, CMXA → Chapter. |
| Removing and installing coolant pump → Chapter. |
| Removing and installing thermostat → Chapter. |
| Removing and installing radiator fan -V7- and radiator fan 2 -V177- → Chapter |
|
|
|
